Push to talk
Select
Menu
>
Connect.
>
PTT
.
Push to talk (PTT) (network service) provides direct
voice communication connected with the push of a key.
With push to talk, you can use your device as you would
use a walkie-talkie.
You can use push to talk to have a conversation with
one person or with a group of people, or to join a
channel. A channel is like a chat room: you can call the
channel to see if anyone is online. The channel call does
not alert the other participants; the participants just
join the channel and start speaking with each other.
In push to talk communication, one person talks while
the other participants listen through the built-in
loudspeaker. Participants take turns responding to
each other. Because only one participant can talk at a
time, the maximum duration of a speech turn is limited.
For details of the speech turn duration for your network,
contact your network operator or service provider.
Remember to hold the device in front of you during a
push to talk call so you can see the display. Speak
towards the microphone, and do not cover the
loudspeaker with your hands.
Phone calls always take priority over push to talk.
Before you can use push to talk, you must define the
push to talk access point and push to talk settings. You
may receive the settings in a special text message from
the service provider that offers the push to talk service.
User settings
Select
Options
>
Settings
>
User settings
.
Define the following:
•
Incoming PTT calls
— Select
Notify
if you want to see
a notification of incoming calls. Select
Auto-accept
if
you want push to talk calls to be answered
automatically. Select
Not allowed
if you want push
to talk calls to be rejected automatically.
•
PTT call alert tone
— Select
Set by profile
if you want
the incoming call alert setting for push to talk to
follow your profile settings. If your profile is silent,
you are not available to others using push to talk,
except for callback requests.
29
Ma
ke ca
lls
file:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml
Page 29
Apr 19, 2006 9:43:04 AM
file:///C:/USERS/MODEServer/zmao/33167043/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml
Page 29
Apr 19, 2006 9:43:04 AM
•
Callback request tone
— Define the ringing tone for
callback requests.
•
Application start-up
— Select if you want to log in to
the push to talk service when you switch on your
device.
•
Default nickname
— Enter your default nickname
(20 characters maximum) that is displayed to other
users.
•
Show my PTT address
— Define if you want callers
to see your push to talk address. You can let all callers
see the address, show the address only to one-to-
one callers or channel participants, or hide the
address from all callers.
•
Show my login status
— Define whether your login
to the push to talk server is shown or hidden from
other users.
Connection settings
Select
Options
>
Settings
>
Connection settings
.
Define the following:
•
Domain
— Enter the domain name obtained from
your service provider.
•
Access point name
— Select the push to talk access
point.
•
Server address
— Enter the IP address or domain
name of the push to talk server obtained from your
service provider.
•
User name
— Enter your user name obtained from
your service provider.
•
Password
— Enter a password, if required, to log into
the push to talk service. The password is provided by
the service provider.